Water softener replacement
Many Midland softeners fail early because they were never big enough for the water.
Replacing a softener means removing the old unit and putting in one sized and set for your water and your household today. In Midland it's often the fix for a softener that never kept up, not just one that wore out.
Signs it's time
- Hard water between regenerations
- Regeneration every day or two
- Repeated repairs
- Cracked tank or brittle fittings
- Parts no longer available
- A bigger household than when it was installed
Why undersizing is common here
Builder-grade softeners are often sized for typical city water. The City of Midland lists its hardness at 400 to 600 ppm, roughly 23 to 35 grains per gallon, so a unit that would be fine elsewhere can be stretched thin here. Replacing it with the right capacity cuts regeneration frequency, which saves salt, water and wear.
What to compare
- Grain capacity for your hardness and water use
- Metered, demand-based regeneration
- Twin-tank designs for large households
- Heat-tolerant placement in the garage
- Warranty on the tank, valve and resin
What affects the cost
The new equipment, removal of the old unit, any plumbing changes and add-ons such as an RO system. The company quotes the job after seeing the setup.
Where we can connect you
Common questions
Should I go bigger when I replace my softener?
If the old one regenerated very often or let hard water through, probably. Size from a test and your water use, not the old unit.
Can the new softener use the old loop?
Usually, if the loop and bypass are in good shape. The company checks during the estimate.
Related services
More background: Midland County hard water guide.
Scale on everything? Want better drinking water?
Call and we will connect you with a water treatment company that serves Midland and Odessa.